become an author

7 Simple Plumbing Maintenance Tasks You Should Do Yearly

plumber toorak

Regular plumbing maintenance is crucial to prevent leaks, clogs, rust buildup, and other problems down the road. While it’s easy to overlook yearly plumbing upkeep when things seem to be flowing smoothly, staying on top of a few key tasks can save you from expensive plumbing repairs and water damage over time.

Implementing just seven simple plumbing maintenance tasks each year can extend the life of your pipes, clear out grime before it leads to clogs, prevent leaks, and help keep your water flowing properly. Best of all, these tasks don’t require much time or effort.

Here are seven easy plumbing maintenance tasks every homeowner should make part of their yearly home checklist, including scheduling an annual inspection by a professional plumber in Toorak.

Inspect Exposed Pipes and Supply Lines

Once a year, take the time to visually inspect all exposed water supply pipes and drain pipes throughout your home. Look for any early signs of leaks like moisture, dripping condensation, or rust spots. Also check connections to make sure nothing is loosening up.

Replacing a few fittings or tightening things up during your annual inspection can prevent more extensive pipe repairs if leaks start. It’s also useful for catching dripping pipes, allowing you to add insulation before the dripping causes water stains or rot damage.

Clear Drains of Built-Up Gunk

Slow-flowing sink or tub drains that start taking longer to empty are a sign of gunky build-up. Once a year, you’ll want to use either a store-bought drain cleaner or try some DIY methods to dump hot water and baking soda or vinegar down your drains, or alternatively, you can seek assistance from a professional plumber in Toorak.

Allowing the solutions to sit for a few minutes before flushing with hot water can break up grime, hair, soap residue, and any other gunk clinging to your drain walls. Doing this yearly cleaning routine keeps drains clear and minimises your risk of dealing with a fully clogged drain.

Deep Clean Garbage Disposals

For garbage disposals, it’s smart to give the grinding components a good scrub at least once a year. Start by running ice cubes through the disposal to clean the inside walls. Sprinkle in some baking soda and vinegar and let it fizz for a few minutes before flushing with water.

You can also find disposal cleaning packets at most hardware stores. Simply toss one in and run the disposal to break up grease and odor-causing debris. Keeping your disposal fresh and grease-free prevents jams and keeps it running smoothly.

Disinfect Faucet Aerators

Faucet aerators are prime breeding grounds for bacteria and limescale build-up from dripping water. Give them a good cleaning by removing and disassembling the aerator heads.

Soak all the pieces for 30 minutes in white vinegar and use an old toothbrush to remove gunk and growth. Rinse thoroughly before reassembling and remounting the aerators. Doing this yearly helps optimise water flow and reduces spurts or irregular streams.

Flush Hot Water Heaters

To maximise efficiency and life span, water heaters need yearly flushing to clear out sediment that collects at the bottom of the tank. This sediment eventually corrodes the tank if left untouched.

Flushing a tank is as simple as attaching a hose to the outflow valve at the base of the heater and routing it to an outdoor area or bucket. Open the valve and let water flow out until it runs clear. Closing the valve and refilling the tank completes the flush. Remember to consult a plumber in Toorak for professional assistance if necessary.

Test for Leaks

Undetected leaks can waste over 900 gallons of water monthly. Even small leaks add significantly to water bills over time.

Do an annual visual inspection of all plumbing fixtures for signs of water damage or moisture. A more precise test is to examine your water meter over time. Take an initial reading, refrain from using water for 1-2 hours, then compare a second reading. If usage went up without any water running, you likely have a leak somewhere.

Drain and Refill Hot Water Heater

In addition to flushing out sediment, it’s important to periodically drain and refill the water in your hot water heater tank. Draining the tank helps remove built-up mineral deposits and calcium that can corrode the tank liner.

To drain the tank, shut off power to the heater, attach a garden hose to the outflow valve, and route it to a drain or outside area. Open the valve and allow the tank to fully drain. Close the valve, refill the tank, restore power, and test water temperature at taps

In Conclusion

Like all areas of home maintenance, being consistent about plumbing upkeep is vital for identifying issues early and avoiding costly repairs down the road. By incorporating these seven simple tasks into your yearly home maintenance routine, with the assistance of Doyle Plumbing Group, you can keep drains flowing, pipes intact, water clean, and equipment working just the way it should.

Implementing preventive DIY plumbing checks doesn’t require much time or skill. But staying on top of things will give you peace of mind knowing your plumbing system is in good working order before problems arise.

Leave a Comment

× How can I help you?